Forced Air Manifold

  • 1. 1 1/2" Gate Valve

  • 2. 1 1/2" x 2" Nipple

  • 3. 1 1/2" Tee

  • 4. 1 1/2" x 4" Nipple

  • 10. 3/4" x 1/4" Bushing

  • 6. Forged Burner Tip

  • 7. 1 1/2" x 3/4" Bushing

  • 7a. 3/4" Close Nipple

  • 8. 3/4" Gate Valve

  • 8a. 3/4" Close Nipple

  • 9. 3/4" Tee

  • 10. 3/4" x 1/4" Bushing

  • 12. Fisher 67-743 Regulator

  • 13. 3/4" x 1/4 Bushing

Not Shown: 0 - 5 lb. Pressure gauge.  It screws in to #13.

 

 

Notes:
 

1. The burner tip is forged from 2" black pipe. Forge the last 3" down to 7/8" I.D. See below.
2. The blower attaches to #1.
3. The blower should be 110 cfm @7" H2O
4. The valves are for flow control only. Use a proper shut-off on the gas line.
5. Teflon tape and pressure test all fittings.
6. Use this information at your own risk! No warranty for design, or suitability for any use or application is expressed or implied!

HOURS

(Eastern Time)

Mon – Fri 9AM - 5PM

 

FOLLOW ME
  • Facebook Social Icon
  • Instagram Social Icon
  • Pinterest Black Round
ADDRESS

4509 E Bear River Rd

Boyne Falls, MI

49713

© 2014 Zowada Custom Knives